QuestionQUESTION: How do I disarm the factory alarm,so I can start my van can you also tell me who manufactured the alarm.
ANSWER: Well. the term "factory alarm" tells me it's Dodge/Chrysler's
part. You'd need to talk to them on this trouble.
I am the after market guy around here.
Cntact Dodge on Monday to see if the service department
has a quick reset for you.
Good luck.
ALARMTEK
---------- FOLLOW-UP ----------
QUESTION: it is a after market alarm
Answerok, then, to try to disarm it,
look under the dash area for a button or,
a toggle switch. When you locate it, turn on the
ignition key, press and hold in the button (little
spring loaded micro button, red or black possibly)
until the alarm chirps 1 time. This should over ride
the system, and only the keyless entry part,
if installed, would still be operating.
The LED (light emiting diode) light in the dash
should also go on solid.=VALET/OVERIDE
This stops the alarm except for the keyless
entry if installed. Once in Valet mode,
it will allow the car to start and operate
like there was no alarm at all.
The next step is if wanting to remove it,
you contact a local technician to
locate it, and affect neccesary service
for you.
That should solve the troubles.
ALARMTEK
CARALARMMAN.COM
