Car Alarms: instalation help for a power window control module, clifford matrix, mercury cougar


Question
i have a clifford matrix alarm installed in my mercury cougar. i bought 2 "power window control modules" and need help installing.

PINK wire = to accessories
GREEN wire = left motor
WHITE wire = left switch
ORANGE wire = 500mA activation
BLACK wire = ground
RED wire = +12V
BLUE wire = right motor
BROWN wire = right switch

questions
PINK wire? which one and what color wire is the accessories one.
ORANGE wire? which one and what color wire is the 500mA activation

BLUE wire = right motor
BROWN wire = right switch
PINK wire = to accessories
GREEN wire = left motor
easiest spot to hook up and what color are the wires usually?

any help would be appreciated. they dint give me an installation guide with the kit and the local specialist want to charge $200 for installation.

Answer
I am very sorry, however I did not sell that item
to you & I don't provide my support on the
installation of my competitions equipment
any longer.

It is they're responsibility to help you
since they took your money.

It just got to be too much for me to handle with
all of the unhappy customers requests
coming in on a daily basis that my own customer
base did not get the amount of time involved for
me to assist them with the products I sold them.

This was totally unacceptable, so I had to stop
helping my competitions customers,
and insist they go back to where they bought it
for help with it.

I do hope you understand.
and again, I am Sorry.
You will need to contact the people you got it
from for support on they're system.
Make them do THEY'RE job!

Good luck with it.

ALARMTEK TECHNCIAL
SUPPORT SERVICES @
www.CARALARMZ.com