Nissan Repair: nissan pulsar brakes, n13 nissan pulsar, nissan pulsar

Question
i need to know the sequence in which to bleed the brakes on a n13 nissan pulsar

Answer
Mick,

Get new fluid (DOT3) and start at the back passenger side.  Then the other rear side.  Now, do the passenger side front and then the driver's side front.  To bleed the brakes make sure the master cylinder is full and then have someone press the brake pedal while you open and quickly close the bleeder screw.  Keep an eye on the brake fluid level.  If it goes too low you get to start all over.  Repeat the bleeding process until all dark fluid has been removed.  You will need the car on jack stands and the tires off to get to the bleeder screws.