Small Engines (Lawn Mowers, etc.): yard machine tiller, safety switches, throttle control

Question
I have a yard machine tiller model 21-A-395A129 and I went to try and start it and its not getting any fire. Do you know if there is a kill switch on this model or what it might be?

Answer
Hello Houston:

The Kill Switch is Usually Located on the Throttle Control Bracket of the Engine. **To Check the Ign Coil; Remove the Spark Plug/s. Wrap a Wire Around the Threads of the Plug and Attach the Other End of the Wire to the Engine Block. Remove the Blower Housing (metal engine cover). The Wire that is Connected to the Coil/Ign Module from the Shut Off Switch needs to be Removed (unplugged) from the Coil/Ign Module. Now Check for Spark at the Plug. If Spark, then the Shut Off Switch or the Wire is Bad. If Still No Spark, then the Coil/Ign Module is Bad. If there are Safety Switches on this Unit and the Coil is Good; you Need to Check the Safety Switches for Being Bad Also.** You can View a Breakdown/IPL of this Unit at this Site Addy, http://www.smallenginepartswarehouse.com/parts.asp and Select the Shop Online Parts Look Up. Then Select the Model Tab. Then Select the OEM and Enter the Model Numbers. Then Double Click on the Model in the Results Area. Now you can Select the Section of the Unit you Wish to View. If you Hit a Snag or this Does Not Correct the Problem,  I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Thanks.

Respectfully

John