Small Engines (Lawn Mowers, etc.): HR214, arinet, american honda

Question
What is the correct method for taking off the rear wheel and replacing the tire?

Answer
Hello Joel:

Is this a HR214 PXA, PXA#1, PXA#2, SMA, SMA#1, SMA#2, SXA, SXA#1, SXA#2 ? If the Tire is the Hard Rubber, then After Removal from the Mower, I Usually Cut the Old Tire Off the Rim, then Slide the New One On After it is Heated in Water Enough to Allow it to GIVE and Go Onto the Rim. Then Allow to the Tire to Cool. You can View a Breakdown/IPL of the Mower/Engine at this Site Addy, http://hayward.arinet.com/scripts/EmpartISAPI.dll?MF&app=ASP&lang=EN&TF=Mainfram... and Select the Catalog American Honda. If you Hit a Snag or this Does Not Correct the Problem,  I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Thanks.

Respectfully

John