RV Repair: Repair water damage., spray glue, rv roof

Question
-------------------------
Gerald
I am having trouble get the pictures to work on this form. If you have an email I can send them to it.
From your answer I see that all the wood that is wet will have to come out. I have a lot to get out yet. I have run a fan all night in there and it is drying out a lot. Yes my Rv has the block foam and the paneling glued to it. I guess I tear out till all the wet stuff is gone and replace from there? What kind of glue is used in am RV it is tuff stuff? The structure of the rv is steel almost like a 2x2 but is steel. The out side is fiberglass. What is you sorce for the paneling? I assume I can get the foam fro Lowes or Home depot. Any suggestions would help. When this peoject is complete I guess I should coat the roof what do you reckamend? I don't think I have a rubber roof but I am not sure?
Thank You
Tom


Answer -
I have found in most cases that replacing partial peices of the wall leads to more trouble when there has been this much damage. most all wood in the RV can be replaced.

What parts are you having trouble finding?
Send the pictures and I will go a little deeper into this.
Can you verify that your RV has the block foam and is the paneling attached to it with glue?

Answer
You can use normal paneling, just cut to size. 3M spray glue is the best I have found for reinstalling the paneling and the blocks of foam can be found at Home Depot, Lowe's and Academy.. I like the EPDM rubber
Liquid Roof
http://www.jnkproducts.com/rv_roof_repair.htm.
email pics to gnorman46@sprintpcs.com