QuestionI got it installed brand new. Had it for 1 1/2 years. First, when i would enable the alarm, it would beep but no lights flashed. Then one day, the dash lights went out. My signals werent working so i checked to see if my tail lights were working and found that the Driver side tail light and parking lights are not working. Then the next day, i turned the lights on and started to smell an electrical burning smell and it fried out the whole headlight switch. I found the lights fuze was burnt out so replaced it and it lit up thn blow the fuse 5 seconds later. We cant turn on the light or it will start frying out again. It will arm but will beep 3 times several times a night for no reason. What all still works: remote start, trunk button, lock, unlock (by remote). What could it be? Do you think its worth fixing? Should i just take it out?? I need some good advice.
AnswerYes ma'am, from the sounds of it,
the alarm is causing the over powering on the
light circuit.
This is a service we offer here at ALARMTEK.
We sell this info online for these retro fit projects
giving you the proper wire colors, locations and polarities,
plus relay diagrams, tips and links to get it extracted
safely.
If this interests you, COPY CUT N PASTE
THE LINK BELOW TO PURCHASE
https://www.paypal.com/xclick/business=installsupport%40aol.com&item_name=1-Vehicle+Specific+Wiring+Chart&item_number=1-Vehicle+Specific+Wiring+Chart&amount=4.99&no_note=1¤cy_code=USD
Or you can go to my site at
www.REMOVEALARM.com and you'll have what you need
by email shortly after payment is received.
NOTE:
ALARMTEK Is a LIVE SERVICE.
These requests are all done by hand when they come in.
Please follow payment with the MAKE, MODEL & YEAR of
the vehicle you are working on for your request to be
expedited!
This will help you correct your trouble.
ALARMTEK-R. Martin
www.CARPROTECTOR.com
