Whether you own an original 1983 Plymouth Voyager, the last model year 2000 model year or any model year in between, it's possible to experience a blown fuse. When this happens, you can replace it yourself in just a matter of minutes, getting you back on the road in no time.
Turn your vehicle off before your remove a fuse. Locate the fuse box, housed under the steering column on the driver's side.
Open the fuse box. Read the inside of the fuse box cover to identify the fuses in each slot.
Remove the fuse that you suspect of being blown. The wire in the middle of the fuse is melted if the fuse is no longer good.
Obtain a new fuse that has the same amperage as the fuse you removed. Confirm the rating by checking the fuse box's cover as replacing with a fuse of a higher amp can cause the fuse to blow again.
Push the new fuse into place and shut the fuse cover tightly. Restart your Voyager to verify the new fuse works properly.
